Our Product
HONDATA K Pro
The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus
Windows software which allows you to re-program the ECU and data
Main features:
Fits inside the ECU
Designed and assembled in USA
USB connection for speed and compatibility
KManager Windows based software for parameter & table editing, calibration uploading and data logging.
Many built in calibrations for common engine combinations
Built in data logging to a laptop
On board data logging memory (8 MB memory, 10- 215 minutes data logging)
Adjustment for different sized injectors, with overall fuel trim.
Configurable for any MAP sensor (to 5 Bar and above)
TPS based table lookup for ITBs
Engine protection from lean air fuel ratios, over boost and low oil/fuel pressure.
Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)
Launch control with anti-lag
Three multi purpose outputs for nitrous control or similar.
Supports lambda tracing from the stock wideband o2 or aftermarket wideband.
PWM output for boost control
Bluetooth support and Hondata Mobile app.
Ethanol sensor input for flex fuel capability.
Alternate speed sensor input.
Dash output serial & CAN streams.
Live tuning and auto tune.
Main features:
Fits inside the ECU
Designed and assembled in USA
USB connection for speed and compatibility
KManager Windows based software for parameter & table editing, calibration uploading and data logging.
Many built in calibrations for common engine combinations
Built in data logging to a laptop
On board data logging memory (8 MB memory, 10- 215 minutes data logging)
Adjustment for different sized injectors, with overall fuel trim.
Configurable for any MAP sensor (to 5 Bar and above)
TPS based table lookup for ITBs
Engine protection from lean air fuel ratios, over boost and low oil/fuel pressure.
Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)
Launch control with anti-lag
Three multi purpose outputs for nitrous control or similar.
Supports lambda tracing from the stock wideband o2 or aftermarket wideband.
PWM output for boost control
Bluetooth support and Hondata Mobile app.
Ethanol sensor input for flex fuel capability.
Alternate speed sensor input.
Dash output serial & CAN streams.
Live tuning and auto tune.